Motor Drives International

Stock VFD Control Panels

SV1 - HVAC Control Panels

Standard Features:

• Great for HVAC applications
• 2 enclosure sizes available
• 12" wide NEMA 1 ventilated enclosure
• All components housed in one single enclosure, no additional wiring or boxes
• 3 lines in & 3 lines out
• UL508A listed
• Remote I/O capability
• Two optional cards can be installed simultaneously
• Soft PWM for peak voltage mitigation at motor terminals and quiet operation
• Full function keypad - Operate the VFD without opening the panel
• 3% (Standard) or 5% (Optional) line reactors are available to limit harmonic distortion to 35% or 27% respectively
• Three contactor bypass (Optional) electrically and mechanically interlocked, allows the motor to run across the line in case of a VFD failure
• Door-interlocked input circuit breaker disconnect - Provides additional safety by powering down the equipment before opening the panel and allowing OHSA lockout
• Embossed numbering system - Each wire is uniquely identified for ease of troubleshooting
• 22mm door operator switches - Power on and off and make adjustments without opening the panel

Optional Features:

• Available from 5 HP to 40HP (230V) or 5 HP to 40HP (460V)
• Input Frequency: 50 or 60Hz
• Overload rating: 110% for 60 seconds, 120% for 3 seconds (Additional overload ratings optional)
• Standard equipment: Mitsubishi F700 series VFD (Other options available)
• Standard ambient operating temperature: 40°C
• 1 year standard warranty (Extended warranties optional)

FF1 - Fan & Pump Control Panels

Standard Features:

• Great for pump and fan applications
• 3 enclosure sizes available
• NEMA 1 gray enclosure
• Filtered forced air ventilation
• Redundant cooling fans for backup
• Easily removable pleated air filter placed outside of the enclosure for easy removal and replacement without cutting power or opening the enclosure door
• All components housed in one single enclosure, no additional wiring or boxes
• 3 lines in & 3 lines out
• UL508A listed
• Remote I/O capability
• Two optional cards can be installed simultaneously
• Soft PWM for peak voltage mitigation at motor terminals and quiet operation
• Full function keypad - Operate the VFD without opening the panel
• 3% (Standard) or 5% (Optional) line reactors are available to limit harmonic distortion to 35% or 27% respectively
• 12% (Optional) or 15% (Optional) harmonic filter available to limit harmonic distortion to 12% or 15% respectively
• Three contactor bypass (Optional) electrically and mechanically interlocked, allows the motor to run across the line in case of a VFD failure
• Door-interlocked input circuit breaker disconnect - Provides additional safety by powering down the equipment before opening the panel and allowing OHSA lockout
• Embossed numbering system - Each wire is uniquely identified for ease of troubleshooting
• 22mm door operator switches - Power on and off and make adjustments without opening the panel

Optional Features:

• Available from 1/2 to 75HP (230V) or 1/2 to 800HP (460V)
• Input Frequency: 50 or 60Hz
• Overload rating: 110% for 60 seconds, 120% for 3 seconds (Additional overload ratings optional)
• Standard equipment: Mitsubishi F700 series VFD (Other options available)
• Standard ambient operating temperature: 40°C
• 1 year standard warranty (Extended warranties optional)

F3R - Outdoor Rated Control Panels

Standard Features:

• Great for outdoor applications
• 6 enclosure sizes available
• NEMA 3R white enclosure (Reduce sun load up to 20% comparing to gray)
• Filtered forced air ventilation
• Redundant cooling fans for backup
• Easily removable pleated air filter placed outside of the enclosure for easy removal and replacement without cutting power or opening the enclosure door
• All components housed in one single enclosure, no additional wiring or boxes
• 3 lines in & 3 lines out
• UL508A listed
• Remote I/O capability
• Two optional cards can be installed simultaneously
• Soft PWM for peak voltage mitigation at motor terminals and quiet operation
• Full function keypad - Operate the VFD without opening the panel
• 3% (Standard) or 5% (Optional) line reactors are available to limit harmonic distortion to 35% or 27% respectively
• 12% (Optional) or 15% (Optional) harmonic filter available to limit harmonic distortion to 12% or 15% respectively
• Three contactor bypass (Optional) electrically and mechanically interlocked, allows the motor to run across the line in case of a VFD failure
• Door-interlocked input circuit breaker disconnect - Provides additional safety by powering down the equipment before opening the panel and allowing OHSA lockout
• Embossed numbering system - Each wire is uniquely identified for ease of troubleshooting
• 22mm door operator switches - Power on and off and make adjustments without opening the panel

Optional Features:

• Available from 5 to 75HP (230V) or 5 to 800HP (460V)
• Input Frequency: 50 or 60Hz
• Overload rating: 110% for 60 seconds, 120% for 3 seconds (Additional overload ratings optional)
• Standard equipment: Mitsubishi F700 series VFD (Other options available)
• Standard ambient operating temperature: 40°C
• 1 year standard warranty (Extended warranties optional)

Custom VFD Control Panels

Capabilities:

• UL 508A Tested and Certified
• Over 95% System Efficiency
• Operation in up to 95% Relative Humidity
• Over a 95% Power Factor Rating
• Standard NEMA 1 Force Filtered Intake Ventilation Plenum
• Door Interlocked Input Circuit Breaker Disconnect
• Full Load Capability up to 5,000 ft. in Elevation
• 120V Control Power Transformer with Primary and Secondary Fusing
• Operating Temperature -10° to 40° C
• Hot Emboss Stamped Wire Marking

• Bypass Contractor Arrangement
• VFD Isolation Contactor / Switch
• AC & DC Line Reactors
• Integrated Pure Power II Harmonic Filter
• Output dv/dt Filter
• PLC or Custom System Control Package
• 10 or 20 Yr. Warranty TVSS Package
• NEMA 3R & Various Other Enclosure & Configuration Options
• Operator Device Panel with Advanced Keypad and Heavy Duty 22mm 100,000 Hour Pilot Lights